Aug 142018
When both your arms look like this you KNOW you have been installing the four AN3-10A bolts, washers and nuts to attach the HS front spar to the fuselage – by yourself. Just a note, I was not happy with the length of the AN3-10A bolts, they were too long and the nuts bottomed out on the middle two bolts. I added a washer under the bolt head and now all four are acceptable. Torqued and marked.
These can be installed by one person but it’s a lot easier if you can get a small person into the fuselage. I just didn’t happen to have a small person handy.