Oct 012015
 

Mounted the starter contactor using one of the battery box mounts and shimmed the lower bolt hole which goes through a reinforcement angle.  Connected the two with a brass bar.

image

Mounted the ANL current limiters next to the battery box and above the starter contactor.  I can reach these from the bottom of the cowl, if I ever need to.  Power will come from the unswitched side of the starter contactor, the post connected to the battery contactor.  Both share the hot side with a brass bar.

image

Mounted the shunts as seen here.  The current draw is measured across the two posts on each shunt.

image

 Posted by at 1:48 PM