The holes in the spar through which a mass of wires has to pass are pretty much full. That didn’t take long.
I had to disconnect wires from two db connectors in order to get the wires for the GTR 20 and GTX 23 ES. The standard pins are easy but the mini dsub pins are tricky. Took lots of pictures of the wiring and noted wire positions before pulling anything apart.
Put the connectors back on and two items are wired. I had to add an additional hole in the aft baggage bulkhead for the radio wires.
Ran the pilot and copilot mic and headset wires to this area on the right side. I’ll determine exactly where to place the jacks later. Placing the jacks on the right because you enter the plane from the left side.
