Mar 212015
 

The second bulkhead did not need any shims but the third one did.  I used a .040 shim for almost half the circumference of the bulkhead.  This is the aft side so the shadow is not a gap its where the radius of the bulkhead meets the shim.

IMG_2434

 

I need to final drill the skins to the longerons, debur, dimple and rivet the skin in place.  I’ll leave it off for a while so I can easily get to the inside as a lot of equipment is remote mounted; transponder, second comm, elt, etc.  For now I’m keeping the PC680 battery on the firewall.  Look no pucker at the clecos.

IMG_2432

 

 Posted by at 4:28 PM